RingOffice SIP Trunk Configuration for Asterisk
type=friend (If IP based Trunk then use type=peer)
username= (RO account ID/DID)
authuser= (RO account ID/DID)
secret= (RO Trunk password/DID account service password). [ If you did not have the Trunk/RO DID account service password,Please let us know]
context=from-trunk
host= sip.ringoffice.com (or IP address 208.89.104.241)
fromdomain=sip.ringoffice.com
canreinvite=no
dtmfmode=rfc2833
qualify=yes
nat=yes
disallow=all
allow=g729
allow=g723
allow=ulaw
allow=alaw
type=friend (If IP based Trunk then use type=peer)
username= (RO account ID/DID)
authuser= (RO account ID/DID)
secret= (RO Trunk password/DID account service password). [ If you did not have the Trunk/RO DID account service password,Please let us know]
context=from-trunk
host= sip.ringoffice.com (or IP address 208.89.104.241)
fromdomain=sip.ringoffice.com
canreinvite=no
dtmfmode=rfc2833
qualify=yes
nat=yes
disallow=all
allow=g729
allow=g723
allow=ulaw
allow=alaw
RO account ID/DID:ServicePassword@sip.ringoffice.com
To check SIP trunk registration status, you can go to PBX > Tools > Asterisk CLI
Enter the command:
sip show registry
You will be able to see the Trunk registration information.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article